Đồng hồ đo nhiệt độ TDS-X322R1
TDS-K1031,
TDS-4339,
TDS-K0821,
HY-K0821,
ZSK,
Mô tả sản phẩm
For Intelligent Temperature Circuit Detector, PIC single-chip microcomputer based technology is adopted. With input of thermal resistance sensor signal, it can provide circuit detection and control on 8-channel, 16-channel and the temperature within it. And the main properties are followed:
– LED display: indicating measured value, setting parameters, the channel number of alarming.
– WATCH DOG monitoring technique to avoid breakdown, and digital velocity wave filtering to increase anti-disturbance ability.
– E2PROM data protection, and all setting will not lose in case of power interruption.
– Static / dynamic check selection, and static check can be changed to any channel by manual shift.
– The number of circuit detection can be freely set within the specified range.
– The time for circuit detection of each channel can be freely selected from 1 and 10 seconds.
– Instrument accuracy controlled by software, and commissioning only needs operation on the panel.
Thông số kỹ thuật Đồng hồ đo nhiệt độ TDS-X322R1
– Number of circuit detection: 8-channel, 16-channel( to be determined when ordering);
– Ambient: temperature range 0~40℃; relative humidity ≤85%;
– Working power:220V AC±10%;50Hz;
– Range:-20℃~+150℃;
– Accuracy grade: ±0.5%FS±1 character;
– Display mode: quadbit 0.56″LED indicating real-time measured value, and indicating EP0 at signal short-circuit, and indicating EP1 at signal disconnection; if display: OH referring to upper limit 2 alarming, and OL referring to upper limit 1 alarming; and no display if not reaching the setting.
– Alarming function: indicating EP1 for disconnection alarming, EPO for very low scale, EP0 for very high one;
– Control setting: each channel can be set within full scale;
– Contact output: AC220V /2A。
– Time for circuit detection: for each channel, freely adjusted from 1 to 10 seconds, step 1 to plus or minus one second.
– RS485 communication protocol(see attachment);
+ Baud rate: 2400 PbS;
+ 11-bit asynchronous communication mode;
– Input signal: CU50 copper resistance, Pt100 resistance( to be determined when ordering);
– Power loss: ≤5W;
– Instrument weight: ≤ 0.8Kg;
Đánh giá
Chưa có đánh giá nào.